CP 4013

4000 series cold plate for the XHP module and any 86x127mm bolt pattern module

The CP4013 aluminum friction stir welded cold plate has been optimized specifically for the high heat flux of silicon carbide. The MDT (micro deformation technology) inside allows for the very low thermal resistance, low pressure drop and balanced parallel flow.

* Thermal resistance is calculated as the difference between the maximum cold plate temp and the inlet fluid temp divided by the total cold plate power.
** Pressure drop is calculated from inlet to outlet without fittings, Coolant used for testing: 50/50 water and ethylene glycol.
***Preliminary results based off www.microcooltool.com, see below for empirical results

See empirical testing results below from Wolfspeed:
Using a 50/50 water-ethylene-glycol coolant with a flowrate of 12 L/min and a temperature of 25°C, the maximum power dissipation for the flat baseplate CAB450M12XM3 is measured at 750 W per position at a junction temperature of 175°C for a thermal resistance of 0.2°C/W for RΘJL (junction to liquid)

MDT In Line Pin Fin Options:

  • 4 fin/inch (~2.4mm gaps) Best pressure drop
  • 8 fin/inch (~1.2mm gaps)
  • 12 fin/inch (~1mm gaps)
  • 20 fin/inch (~0.5mm gaps) Highest performance

    Custom Options (call or email):  

    • Length: Extrusion length can change to accommodate up to 8 IGBTS
    • Ports: NPT/SAE/BSPP (G)/ Welded on hose barb
    • Plating Options: Electroless Nickel inside and out available
    • Double-sided options

    NOTES:
    1. DIMENSIONS AND TOLERANCES IAW ASME Y14.5M – 1994
    2. MATERIAL: ALUMINUM 1100-H14 (FINPLATES) / ALUMINUM 6061-T6 OR 6063-T6 (TUB)
    3. 4MM TALL MDT IN LINE PIN FIN OPTIONS: 20, 12, 6×8 & 3×4 FPI (GAP/DIA 0.0, 1, 1.2, 2.4mm)
    4. FINISHED ASSEMBLY MASS: 2137 GRAMS

    Advanced Friction Stir Welding

    about us

    Wieland Microcool is an industry leader in base plate, cold plate and total cooling loop system designs. We offer a myriad of fin and custom pin fin geometries designed to improve reliability and thermal efficiency in cooling electronic systems.

    CONTACT US

    2100 Market Street NE
    PO Box 2202
    Decatur, AL 35601
    USA

     

    FOLLOW US

    Copyright 2020 © Wieland Microcool. All Rights Reserved. Privacy Policy

    Wieland Microcool News

    Subscribe to our newsletter to receive new product and technology updates. We will not sell your personal information. 

    You have Successfully Subscribed!